13层办公楼设计大庆市的高层办公楼.docVIP

摘 要 本设计为一拟建在大庆市的高层办公楼,建筑面积约为8848.1㎡。建筑主体为13层，采用现浇钢筋混凝土框架结构体系。设计内容主要包括：建筑设计，结构设计两大部分。 建筑设计部分包括：平面图设计、立面图设计、剖面图设计。平面设计中考虑了高层建筑对防火及抗震的要求，采用规则的矩形平面；立面设计中考虑了办公类建筑的特点，装修简洁大方。建筑设计合理，满足建筑功能要求。 结构设计部分包括：框架结构布置，荷载计算，框架侧移刚度计算，横向地震作用下框架结构的内力和侧移计算，横向风荷载作用下框架结构内力和侧移计算，在竖向荷载作用下框架结构的内力计算，内力组合，梁、板、柱和基础的配筋计算。在计算方法上，对于水平地震作用采用底部剪力法；对于竖向荷载作用下框架内力采用分层法。 关键词：高层办公楼；框架结构；预制桩基础；内力组合；配筋计算 Abstract The design is an high-rise office building which will be built in Daqing city , the area of the building is 8848.1㎡. It has floors. The cast-in-place reinforced concrete frame structure is adopted in this building. The design mainly includes the following two parts: the architectural design and the structural design. The following work is done in the architectural design: the plan design, the elevation design and the section design. During the plan design, considering the demands of earthquake resistance and fire resistance, the rectangular plan is designed; During the elevation design, considering the office building is characteristic, the decoration is simple and grand. The architecture design is reasonable and satisfies the construction’s function request. The structural design includes: the arrangement of the frame structure, the calculating of the load, the calculating of the rigidity, the calculating of the frame force and the horizontal displacement under the horizontal earthquake action and wind load, the calculating of the force under the vertical load, the combination of the force, the section design and the reinforcing steel bar calculating of the beams, floors, columns and the foundations. In the calculation method ,used for the horizontal seismic base sheear method ;The internal force under vertical load by stratification. Key words: high rising office building; frame structure; pre-cast pile foundation; force combination; reinforcing steel bar calculating 目 录 第1章 建筑设计 1 1.1 方案的设计构思 1 1.2 平面设计 1 1.3 立面布置 2 1.4 剖面设计 2 1.5 交通防火设计 3 1.6 建筑装饰材料 3 第2章 结构设计 6 2.1 工程概况 4 2.2 结构布置及计算简图