毕业设计外文翻译--21世纪前半页矿井提升机在深井中的应用.docVIP

毕业设计外文翻译 学 院：机械与动力工程学院 专业名称：机械设计制造及其自动化 年级班级：学生姓名：指导教师： 翻译部分 英文原文 Mine Hoisting In Deep Shafts In The 1st Half Of 21st Century Alfred Carbogno Key words: deep shaft, mine hosting, Blair winder, rope safety factor, drum sizing, skip factor Introduction The mineral deposits are exploited on deeper and deeper levels. In connection with this, definitions like “deep level” and “deep shaft” became more and more popular. These definitions concern the depth where special rules regarding an excavation driving, exploitation, rock pressure control, lining construction, ventilation, underground and vertical transport, work organization and economics apply.  It has pointed out that the “deep level” is a very relative definition and should be used only with a reference to particular hydro-geological, mining and technical conditions in a mine or coal-field. It should be also strictly defined what area of “deep level” or “deep shaft” definitions are considered. It can be for example:  - mining geo-engineering,  - technology of excavation driving,  - ventilation (temperature). It is obvious that the “deep level” defined from one point of view, not necessarily means a “deep level” in another area. According to [5] as a deep mine we can treat each mine if:  - the depth is higher than 2300 m or  - mineral deposit temperature is higher than 38 oC. It is well known that the most of deep mines are in South Africa. Usually, they are gold or diamonds mines.  Economic deposits of gold-bearing ore are known to exist at depths up to 5000 m in a number of South Africa regions. However, due to the depth and structure of the reef in some areas, previous methods of reaching deeper reefs using sub-vertical shaft systems would not be economically viable. Thus, the local mining industry is actively investigating new techniques for a single-lift shaft up to 3500 m deep in the near future and probably around 5000 m afterwards.