毕业论文--(嵌入式LED广告牌).docVIP

JIU JIANG UNIVERSITY 毕 业 论 文 题 目 基于嵌入式技术的LED广告牌 功能开发 英文题目 LED Billboard Feature Development Based on Embedded Technology 院 系 信息科学与技术学院 专 业 计算机科学与技术 姓 名 班级学号 指导教师 二○一二年五月 摘 要现在LED电子屏用来显示企业介绍公告标语新闻广告等，是综合信息发布的最佳媒体采用了低电压扫描驱动，具有耗电省、使用寿命长、成本低、亮度高、视角大、可视距离远、防水、规格品种多等优点，可以满足各种不同应用场景的需求本设计作为主控制，外围电路来驱动16×的点阵LED显示屏。inux系统的控制程序，来控制LED广告牌动态显示。实现一个宣传小广告，LED广告牌的动态效果包括开始、暂停、停止、闪烁、更新、显示时间和日期。 因运算能力非常强大，内部资源也十分丰富，极大的简化了硬件设计的难度，缩短了开发周期。键词：Abstract Now, LED electronic display screens generally be used to display company profile, bulletins, posters, news, advertising and so on. And it is the best media integrated information publishing. It has used the low-voltage scanning driver, with low power consumption, long life, low cost, high angle, brightness Visual distance, waterproof, specifications variety advantages, can meet the needs of a variety of different scenarios. ARM9 is a master controller of this design, designed LED character device drivers and the external circuit to driver a 16×64 dot-matrix LED display. And achieve relatively feature-rich control program based on Linux systems, to control the dynamic display of LED billboards. The design and realization of a promotional ad, Dynamic effect of LED billboards including pause, stop, start, the flash, updates, display time and date. Because the ARM operation ability is very powerful, internal resources is also very rich, which greatly simplifies the difficulty of hardware design, shortening the development cycle. So based on embedded LED development has good prospects. key words : Embedded, Character Device Driver, LED Billboard 目录摘 要 I Abstract II 1 绪论 1.1 LED显示屏的发展及应用 (1) 1.2 嵌入式技术概述 (2) 1.3 题目来源 (2) 1.4 设计任务 (3) 2 LED屏显示工作原理分析 2.1 LED屏点阵模块结构 (4) 2.2 LED屏动态显示分析 (4) 2.3 LED屏控制方式 (6) 2.4 本章小结 (8) 3 基于ARM9的LED广告牌硬件设计 3.1 总体设备连接 (9) 3.2 16×64点阵屏电路设计 (9) 3.3 ARM与LED屏连接 (14) 3.4 本章小结 (18) 4 开发