毕业论文--107LED显示的接触压力测试仪.doc

毕业论文 题 目: LED显示的接触压力测试仪 院系名称： 专业班级： 学生姓名： 学 号： 指导教师： 教师职称： （空2行） 传感器传感器传感器AD620对信号进行放大，约放大200倍。由于采集到的信号是模拟电压信号，所以要用模数转换器DS2450对这个信号进行模数转换。要使LED显示正常，作为电路核心的单片机是必不可少的，单片机控制转换器的模数转换和74LS595的驱动显示，另外驱动芯片74LS595在移位的过程中，输出端的数据可以保持不变，数码管没有闪烁感。传感器AD620；A/D转换器；LED Title Contact Force Testing Instrument Using LED Display Abstract With the SCM and sensor technology are widely used today, They show great action of space in the equipment of LED display.The design is based on a contact pressure tester that the LED display, LED commonly used as components of light, And often used for industrial control systems in real-time information display.The microcontroller and sensors are designed to control the entire core and acquisition signals in the centre. For collection from the sensor signals to the pressure on small issues, using Amplifiers AD620 to enlarge the role of the signal amplification, about 500 times to enlarge. Due to the signal we collect is analog voltage signal, So we use ADC DS2450 which can used for analog-digital conversion, To make sure the LED display in gear, SCM as a core of the circuit is essential, It controls the analog-digital conversion of the converter and the driving display of 74LS595. In addtion ,74LS595 as a driver CMOS chip in the process of displacement, Output data can remain unchanged, no flashes of digital flu. Through the deign and debug of the software and hardware, We received the result what we expected, and each module completed their respective features, It shows that the system is suit for the pressure testing. Keywords: Pressure sensors;SCM;Amplifiers AD620;A / D converter;LED display. 摘 要 随着单片机和传感器传感器传感器AD620对信号进行放大，约放大500倍。由于采集到的信号是模拟电压信号，所以要用模数转换器DS2450对这个信号进行模数转换。要使LED显示正常，作为电路核心的单片机是必不可少的，单片机控制转换器的模数转换和74LS595的驱动显示，另外驱动芯片74LS595在移位的过程中，输出端的数据可以保持不变，数码管没有闪烁感。传感器AD620；A/D转换器；LED显示。 摘 要 ××××××××××××××××（小4号宋体，1.5倍行距）2行） ×××；×××；×××（—5个关键词，小4号宋体）4号黑体） Contact