毕业设计论文-湿滑路面阻抗检测与发送终端设计与实现.doc

学 号 密 级 哈尔滨工程大学本科生毕业论文 院（系）名称：信息与通信工程学院 专业名称：微电子学 学生姓名：指导教师： 哈尔滨工程大学 2016年6月 学 号 密 级 Design and realization of the inspection and transmitter system about slippery road surface’s impedance 学生姓名：所在学院：信息与通信工程学院 所在专业：通信工程 指导教师：职称：教授 所在单位：哈尔滨工程大学 论文提交日期：2016年6月7日 论文答辩日期：2016年6月日 学位授予单位：哈尔滨工程大学本次课题设计的是以为核心的，其中的硬件电路是由控制模块、无线发射接收模块、、所组成的软件是由等软件程序所构成的，采用语言对程序进行的编写。 ABSTRACT With the super-high-speed development of modern technology, relying on advanced sophisticated equipment,its allowed to get the road information (weather, traffic, emergency situations, etc.) for a sufficient collection and management, in order to establish and improve the safe traffic environment,and it would ensure road conditions being in real time monitoring and transmit these information to the processing center of the relevant department.Thus,the road monitoring systems can provide timely and reliable reference to relevant government agencies when they need to make decision about transportation,change speed-limit and release advice or warning for drivers on the road on time,help the safe driving or other applications get enough foundation,effectively avoid the traffic accidents associated with slippery roads.This text is just the research design about the inspection and transmitter system of slippery road surface according to GPRS and embedded technology. This paper focuses on the ARM as the core of the inspection and transmitter system to slippery road surface whose hardware ciucuit is formed by ARM control module, GPRS wireless modules, LCD touch screens, temperature sensors, detection module to road’s impedance,A/D switching circuit;. And its software is made up of some sortwares like transfer of data, drive and control of wireless modules, graphical interface of controlling terminal,etc,which were coded by C language. Key words：inspection of slippery road surface；wireless communications；ARM 目　录 第一章 绪论 5 1.1路面湿滑检测系统的概念 5 1.2路况检测系统国内外的发展现况 5 1.2.1路况检测系