al2o3wcr复合材料的高温摩擦磨损性能word格式论文.docx

Abstract Title: FRICTION AND WEAR BEHAVIOR OF AL2031W-Cr COMPOSITES AT ELEVATED TEMPERATUREMajor: Materials Processing EngineeringName: Tingxu He Supervisor: Prof. Zhenlin LuSignature:_L1主/， 8xμ USignature: AbstractAs an important part in the production of seam1ess steel pipe，moulds are yield to extrusion， impact and we町 repeatedly at high temperature， d 缸e easy to reduce usefullife as deformationand break，thus it is important to study 也eir properties at high tempera阳re. In this p叩er，Ah03reinforced W-Cr matrixcomposlteswith different Ah03 contents were prepared by sol-gelmethods followed by pressureless sintering. Microstructure ，hardness，and fracture toughness of the composites were investigated by SEM，Rockwell hardness and Vickers h缸出less tester， respectively. Resistance to oxidation of the composites was studied at 700C for different time.Effect of operation temperatures ，load capacities，rotating speeds on the high 臼mpera阳re fiction and wear properties of the composites was studied by high temperature wear test，and H13 steelwastaken asa reference. Based on the above experimentalresults，the 丘iction and we町mechanisms of Ah031W-Cr composites at elevated tempera阳res were discussed. The main results of the presented paper 町e as follows.The 企acture toughness of Ab031W-Cr composites wasstudied by indentation meth04.-1??Results showed that fracture toughness decreased firstly and grew to the highest with the increase of A}z03 contents. All the cracks had deflexion，branch ，and some grew to the matrix across Ah03 par往cle.According to results got 企om the high tempera阳re oxidation of Ah031W-Cr composites，吐leweigh gains of composites containing 10% and 20% Ah03 owned similar trend with time extended ，both declining and increasing quickly then. The composite with 10vol% Ah03 had greater weight gain than 20vol% Ah03 in the frrst 4h，but it was contrary between 4h and 8h absolutely，and both of them decreased between 4h..._.6h. The main oxides f