kaydon设备过滤.pptVIP

美国柯顿安过滤公司 液/液分离 KAYDON 特制过滤公司 始建于1930年 专业从事润滑油、燃料油的过滤 致力于液体过滤和液-液分离的研究，拥有丰富的经验和专业的团队。过滤润滑油、燃料油中含有的颗粒、水、油泥，延长油的使用寿命，保护轴承不被腐蚀。 在美国拥有90%以上的市场占有率 主要客户集中于航空、电力、石油、钢铁、矿山等 我们能解决的问题 油中含水的三个层面 水腐蚀后的轴承座圈 Corrosion and pitting due to contamination of water in oil. 杂质颗粒对轴承的损害 Classic example of material loss due to induced fatigue from particles. 我们掌握的技术聚结分离 聚结分离如何工作 典型的聚结分离系列设备 Combination 3 micron particle filtration and water removal. Available in: 1gpm 5gpm 10 gpm 30 gpm 60 gpm 100 gpm Dry turbine lube oil (ISO 32 and 68) to 100ppm (patented design) 聚结分离滤芯 我们掌握的技术真空 真空蒸馏脱水 Most effective way to dry Hydraulic, Gear, and Transformer oils to less than 100 ppm residual water content. Removes all emulsified water. Removes some Dissolved Water Removes Air Will not affect additives in the oil. Water boils at 212° F at atmospheric pressure. If placed in a vacuum chamber, the boiling point can be lowered to prevent oil damage Water is then removed from oil by distillation 最好的设计—使用内部冷凝器 典型的真空蒸馏系列设备 Combination Distillation and 3 micron filtration Available in 5 gpm 10 gpm 20 gpm 30 gpm Drys oil to 50 ppm 抗燃油过滤 抗燃油存在的普遍问题 Pyrophosphate Deposits Plugged Servo Strainers Foaming Jelling Low Resistivity (Electrolytic Etching) Many of these problems are caused by high acid #’s, water, and salt deposits which form in the oil. 抗燃油过滤设备 Maintain a low TAN (Total Acid #) 0.05 - 0.03 Maintain a low water content 100-200ppm Maintain low particle count ISO 18/15/12 or better System designed to remove harmful acids, water, particulate, and remove harmful salt deposits from the oil. 我们掌握的技术精滤 油泥/胶状物 – 描述 稀薄的橙色, 棕色或者黑色不溶涂层沉淀物产生在润滑油内部 微小污染的构成是润滑油劣化的副产品;它的直径小于1微米 油泥颗粒不溶于油 油泥颗粒带有磁性 油泥 /胶状物– 描述 油泥 /胶状物– 描述 油泥 – 表现 汽机润滑油颜色变暗 Increase in Make-Up Oil 油损量增高 增加轴承的磨损率 油温升高 阀门操作迟缓\不灵活\卡涩 酸值增高 总结 BCA? Technology is for use with STEAM turbines and COMBUSTION (Gas) Turbines Available: To add to existing Turbo-TOC? systems. As an option for new Turbo-TOC? systems. Or as a “