毕业论文外文文献翻译电气工程及其自动化专业AT89S52单片机应用.docVIP

毕 业 设 计（论文） 外 文 文 献 翻 译 文献、资料中文题目：AT89S52单片机应用 文献、资料英文题目： AT89S52 MCU Applications 文献、资料来源： 文献、资料发表（出版）日期： 院 （部）： 专 业： 电气工程及其自动化 班 级： 姓 名： 学 号： 指导教师： 翻译日期： 2017.02.14 本科毕业设计（论文） AT89S52单片机应用中英文翻译 专业名称： 电气工程及其自动化 年级班级： 学生姓名： 指导老师： AT89S52 MCU Applications Function Characteristic Description The AT89S52 is a low-power, high-performance CMOS 8-bit microcontroller with 8K bytes of in-system programmable Flash memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the indus-try-standard 80C51 instruction set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory pro-grammer. By combining a versatile 8-bit CPU with in-system programmable Flash on a monolithic chip, the Atmel AT89S52 is a powerful microcontroller which provides a highly-flexible and cost-effective solution to many embedded control applications.The AT89S52 provides the following standard features: 8K bytes of Flash, 256 bytes of RAM, 32 I/O lines, Watchdog timer, two data pointers, three 16-bit timer/counters, a six-vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator, and clock circuitry. In addition, the AT89S52 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power-down mode saves the RAM con-tents but freezes the oscillator, disabling all other chip functions until the next interrupt or hardware reset. Pin Description VCC ：Supply voltage. GND ：Ground. Port 0：Port 0 is an 8-bit open drain bidirectional I/O port. As an output port, each pin can sink eight TTL inputs. When 1s are written to port 0 pins, the pins can be used as high-impedance inputs. Port 0 c