基于数控程序重构的三轴数控铣床误差软件补偿分析-error software compensation analysis of three-axis cnc milling machine based on numerical control program reconstruction.docxVIP

万方数据 Research on Three-axis CNC Milling Machine Error Software Compensation Based on Reconstruction NC Program By LIU Xue B.E.( Wuhan Polytechnic University ) 2012 A thesis submitted in partial satisfaction of the Requirements for the degree of Master of Science in Mechanical Manufacturing and Automation in the School of Mechanical and Electrioncal Engineering of Lanzhou University of Technology Supervisor Associate Professor Hu Shijun April, 2015 兰 州 理 工 大 学 学位论文原创性声明 本人郑重声明：所呈交的论文是本人在导师的指导下独立进行研究所 取得的研究成果。除了文中特别加以标注引用的内容外，本论文不包含任 何其他个人或集体已经发表或撰写的成果作品。对本文的研究做出重要贡 献的个人和集体，均已在文中以明确方式标明。本人完全意识到