哈工大《飞行器设计综合实验》喷气C语言程序.docVIP

#includeICETEK-C6713-A.h #define UART_BASE_ADDR 0#define OFFSET 2 #define RBR *((short*)(UART_BASE_ADDR+0*OFFSET)) #define THR *((short*)(UART_BASE_ADDR+0*OFFSET)) #define IER *((short*)(UART_BASE_ADDR+1*OFFSET)) #define IIR *((short*)(UART_BASE_ADDR+2*OFFSET)) #define FCR *((short*)(UART_BASE_ADDR+2*OFFSET)) #define LCR *((short*)(UART_BASE_ADDR+3*OFFSET)) #define MCR *((short*)(UART_BASE_ADDR+4*OFFSET)) #define LSR *((short*)(UART_BASE_ADDR+5*OFFSET)) #define MSR *((short*)(UART_BASE_ADDR+6*OFFSET)) #define SCR *((short*)(UART_BASE_ADDR+7*OFFSET)) #define DLL *((short*)(UART_BASE_ADDR+0*OFFSET)) #define DLM *((short*)(UART_BASE_ADDR+1*OFFSET)) #define DA_DATA_H *(char*)0#define DA_DATA_L *(char*)0x9010000A #define DA_CTL *(char*)0x9010000C #define DA_CHN1 0x00 #define DA_CHN2 0x40 #define DA_CHN3 0x80 #define DA_CHN4 0xC0 #define CECTL1 #includemath.h #includestdio.h #includestdlib.h char cReceive; char bReceive[21]; char fReceive[15]; double value=0,p_value=0,omg=0,sat=90/57.3,ss,acc=0.01,satf=0/57.3; double on_off,abs_omg; int i,j,k,m; void send_DA(unsigned char channel,unsigned int da_data); main() { unsigned int uWork; m=0; p_value=0; value=0; cReceive=0; LCR=0x80; DLL=0x06; DLM=0x00; LCR=0x03; FCR=0x01; MCR=0x20; IER=0x00; send_DA(2,0); send_DA(3,0); while(1) { i=0; do { uWork=LSR; } while((uWork1)==0); cReceive=RBR; if(cReceive==\n) { do { do { uWork=LSR; } while((uWork1)==0); cReceive=RBR; bReceive[i]=cReceive; i++; }while(i=18); } k=0; if(bReceive[18]==1) { do {