Numerical Modelling of Fluid Flow with Heat and Mass Transfer at the Surface of a Gas Bubble资料.pdf

0263–8762/02/$23.50+0.00 # Institution of Chemical Engineers =titleshtm Trans IChemE, Vol 80, Part A, September 2002 NUMERICAL MODELLING OF FLUID FLOW WITH HEAT AND MASS TRANSFER AT THE SURFACE OF A GAS BUBBLE 1 2 3 Y. Y. YAN , W. Z. LI and J. M. SMITH 1 School of Engineering, Nottingham Trent University, Nottingham, UK 2 Department of Power Engineering, Dalian University of Technology, Dalian, China 3 Department of Chemical Process Engineering, University of Surrey, Guildford, UK numerical modelling of steady axisymmetric viscous external ow and heat and mass transfer at the surface of an inviscid gas bubble has been carried out. A numerical A method based on a velocity–pressure formulation combined with a nite-volume discretization of the Navier–Stokes related equations written in a non-orthogonal body- tted coordinate (BFC) is employed. The method has been validated by calculating the uid ow with heat and mass transfer around the surface of a rigid sphere and comparing with published data that are well regarded as benchmark solutions. The feasibility of the method for simulating