Screw_Designs_in_Injection_Molding_Image_Marked资料.pdf

Technical Expertise • The classical three-section screw can be • Homogeneity may also be improved by means of employed with adequate quality for the additional shear and mixing sections. processing of many thermoplastics. • Efficient optimization of screw geometry taking the • When demands on throughput performance many mutually interacting parameters into consider- and molding quality rise, the three-section ation is possible by means of computer simulations. screw comes up against its limits. • BASF possesses, on the one hand, a suitable simula- • If requirements, with regard to throughput and tion program and, on the other hand, has many years melt homogeneity, are high, double- and multiple- of experience in the optimization and use of screws. flighted screws and also barrier screws afford significant advantages. Screw Designs In Injection Molding Optimized injection molding plasti- cating units N D hM P hF On account of the numerous tasks and demands to be fulfilled, the design and optimization of injection molding plasti- cating units is an optimization problem with a number of objectives. At the same time, the individual variables are LM LC LF not independent of one another but rather mutually interact with one L another. D External screw diameter L Effective length of screw 20– 23 D The aim, in general, is to achieve a