汇报材料87566622.docVIP

污水回用项目质量控制措施( Project quality control measures of sewage recycling ） 项目质量策划(Project quality planning) 根据项目工艺特点，项目部有针对性编写了项目质量计划，制定了高标准的质量目标，同时按照ISO9001标准建立了以项目经理为首的从施工到服务等一系列完整的质量保证体系； According to the technical characteristics of the project, the project department has prepared the pertinent project quality plan, set a high standard of quality objectives, and in accordance with the ISO9001 standard established by the project manager led from construction to service and a complete set of quality assurance system; 针对项目的工程特点，采取的施工质量控制措施如下： According to the engineering characteristics, construction quality control measures as follows： 通过建立健全质量管理体系，从组织机构上对施工质量给予保证。 Through the establishment of a sound quality management system, to ensure the construction quality from the organization. 严格质量控制点检查，加强A、B、C三级质量控制点的管理； Strict examination of the quality control point, to strengthen the A, B, C three level quality control point management ·编制施工方案7本，审批通过7本 Application for inspection of raw materials for 7 times, accepted and qualified for 7 times ·现场取样20次 Site sampling for 20 times ·工序报验32次，一次报验合格率96.9% Application for inspection of working sequence for 32 times, one-time qualification for 96.9% 对关键工序严格落实“三检制”，整个工程的质量过程处在受控状态。 strict implementation of the three system to the key process , the whole process of engineering quality is in controlled state. 制定各项完备的质量管理制度，如《质量奖惩制度》、《质量例会制度》、《质量检查制度》； Formulating a comprehensive quality management system, such as quality rewards and punishment system , quality regular meeting system, quality inspection system; 本月质量例会 4次 钢筋绑扎活动检查 45次 本月工序报验20次 一次报验合格率97.9% 混凝土浇筑后养护 The monthly quality meeting is held for 4 times. Reinforcement binding were examined 45 times. This month the process inspection for 20 times ，an inspection pass rate reaches 97.9% the maintaining after concrete pouring （4）强化材料管理、杜绝不合格材料流入施工现场,为此项目部特制定了高标准的检验试验计划. Strengthening the material manageme