毕业设计（论文）-三孔面板插座注塑模具设计.docVIP

毕业设计说明书 ? ? 题 目 三孔面板插座塑料模具设计 专 业 班 级 学生姓名 指导教师 ??? 201X 年X 月 X 日 摘 要 需要，塑料制品在工业、农业日常生活各个领域应用越来越广，质量要求也越来越高 全套图纸，加 Abstract Plastic injection mold is an important technological equipment of plastic forming, through the flashlight front cover plastic mould design, can fully understand the basic principles, methods of plastic mould design. And can be more skilled use of UG, AUTOCAD software for plastic mold design, improve their ability to draw. Engaged in the design for the future work laid a solid foundation. With the needs of the development of modern industry, plastic products in industry, agriculture, military and other fields of daily life and the application scope is more and more wide, the quality requirements also more and more high, China has become one of the worlds largest plastics market, plastic products production in the worlds second. The main design is on the cover of a flashlight injection mould design, focus on the forming principle of plastic parts, raw materials selection and injection technology were analyzed. By according to the shape, size, precision and surface quality requirement analysis, to determine the required moulding solutions, products after processing, the choice of the parting surface, cavity number and arrangement, the structure of molding parts, pouring system, etc. Key words: Process; The mould structure; Injection molding machine; Mold design 目 录 摘 要 II Abstract III IV 1 绪论 1 概述 1 1 1.3 国外研究现状 2 2 塑料制品分析 3 2.1 明确制品设计要求 3 2.2 明确制品批量 3 2.3 材料选择及性能 3 2.3.1 材料选择 3 2.3.2 材料品种 4 2.4 成型设备 4 2.5 拔模斜度 4 2.6 计算制品的体积和质量 4 2.6.1表面质量的分析 4 2.6.2塑件的体积重量 5 3 注射机及成型方案的确定 6 3.1 注射机的确定 6 4 型腔数的确定及分型面的选择 8 4.1 型腔数的确定 8 4.2 分型面的选择 8 4.2.1 分型面的主要选择原则 8 4.3 确定型腔的排列方式 9 4.4 标准模架的选用 10 4. 模架装配图 10 5 成型零部件的设计与计算 11 5.1 凸模设计 11 5.2 凹模的设计 11 5.3 成型零件工作尺寸的计算 12