毕业设计（论文）-三轴七档变速器的设计.docVIP

本科毕业设计 题 目： 三轴节能变速器的设计 学 院： 机电工程学院 专 业: 机械设计制造及其自动化 班 级： 2012级01班 姓 名： XXXX 学 号： XXXXXX 指导教师： XXXXXX 完成时间： 2016年6月 摘 要 变速器的作用是改变发动机的驱动轮上的转矩和转速,它能固定或分档改变输出轴和输入轴转动比，又称变速箱性能指标比如使用年限 全套图纸，加 三轴式变速器因为具有质量轻、体积小、工作效率高、操作简单等优点，因此广泛应用于一般大多数汽车汽车、汽车设计详细认真的设计Pro/E等制图及发展历史了的合理然后做同时受力分析强度，的刚度强度校核简单了变速器中。 ABSTRACT Transmission to change the engine reached on the driving wheel torque and speed, It can change the output shaft and the input shaft transmission ratio, also known as the speed change box. Transmission speed by a variable speed transmission and control mechanism of two parts. Some performance indexes such as fuel economy, braking performance, ride comfort, service life, portability and stability, and so on, are closely related to the overall structural requirements of transmission. Because of the advantages of light weight, small volume, high efficiency and simple operation, the three axle transmission is widely used in most cars .This design study of the three-axis 7-speed manual transmission, The main investigation of the mechanical principles, mechanical manufacturing, automobile construction, automotive design and other subjects of knowledge mastery and use of the three shaft transmission parts of the detailed design, and the use of AutoCAD, Pro / E drawing software drawing assembly diagram and parts diagram. First of all, this paper describes the background and development history of transmission, introduces the overall development trend and direction of domestic and foreign transmission in recent years. Then, it describes the working principle of the transmission, compared with the different transmission structure, and finally determined to improve the reasonable structure of the program to carry out in-depth design. Then, analyze the gear, shaft, bearing structure and shape, and then make a simple design concept, at the same time the force analysis of the gear bending strength, the stiffness and strength of the shaft and check. At