毕业设计（论文）-等径三通弯管注塑模具设计.docxVIP

三通弯管的注塑模具设计摘要：根据塑料制品的要求，了解塑件的用途，分析塑件的工艺性、尺寸精度等技术要求，选择塑件制件尺寸。本模具采用一模两件，直接式进料，设置冷却系统，选择模具合理的加工方法。附上说明书，系统地运用简要的文字，简明的示意图和和计算等分析塑件，从而作出合理的模具设计，“T”型等直径三通管在日常生活中是比较常见的。本文通过对三通管塑件的工艺分析，进一步确定了塑件的主要成型工艺参数，设计并且确定了三通管注塑模具中的各个系统：如浇注系统、成型零部件设计、侧向分型和抽芯机构、脱模推出机构、分型面以及排气槽、冷却系统、排气系统以及注射机的选用和校核等。最后用CAD和 Solidworks绘制出模具的三维模型图、总装配图、模具爆炸图和动画仿真。本次设计能注塑模具设计的整个流程巩固加深，同时加强了对注塑模具中各个系统的工作原理的理解。关键词：三通弯管；注塑模设计；模具爆炸图；动画仿真全套图纸三维，加Design of tee injection mold based on solidworksAbstract：The plastic products of requirements, understand the use of plastic parts, process analysis, dimensional accuracy and other technical requirements of plastic parts, plastic parts Select size .The two-piece mold using a mold, direct feed, a cooling system, a reasonable choice of mold processing methods. Attach brochures, systematic use of brief text, diagrams and concise and computational analysis and other plastic parts, in order to make a reasonable die design.T type, such as diameter tee is more common in our daily life. This article through the analysis of the technology of tee plastics, further determine the parts of the main forming process parameters, confirming the tee injection mold design and the system:Such as the gating system, molding parts design, side parting and core-pulling mechanism, launched demoulding mechanism, parting surface and exhaust slot, cooling system, exhaust system and the choice of injection machine and check, etc. With CAD and Solidworks finally map out the mould 3 d model, the general assembly drawing, mold explosion diagram and animation simulation. This design to the whole process of injection mold design to consolidate deepen, at the same time to strengthen the working principle of each system in the injection mold of understanding.Keywords:Tee; Injection Mold Design ;Die exploded diagram; Animation Simulation目录1.前言11.1塑料的简介11.2塑料成型基础知识11.3我国塑料模具现状及发展趋势21.4国际塑料模具的发展现状22.塑件工艺性分析32.1塑件塑料的选择32.2塑件的尺寸精度与表面质量52.2.1塑件的尺寸及精度等级52.2.2塑件的表面质量52.3塑件的结构设计62.3.1脱模斜度62.3.2塑件的形状分析62.3.3塑件的壁厚62