毕业设计（论文）-罩盖注塑模具设计.docVIP

模 具 设 计 综 合 实 践 报 告 书 题 目： 罩盖注射模具设计与制造 班 级： 　 姓 名： 　 学 号： 　 指导老师： 　 提交日期： 　 机械优集学院 三维设计制造系  摘 要 本次实践报告的课题为罩盖注塑模具设计，主要在对塑件进行成型分析的基础上从原材料分析、成型特性、分型面的选择、浇注系统的设计、冷却系统的设计、型芯和型腔的结构设计、推出复位结构设计、侧向抽芯机构的设计和导向机构的设计等多方面详细阐述了罩盖注塑模具的设计过程。同时通过合理地选择注射机并对注塑压力、最大注塑量、锁模力、开模行程等相关方面进行校核，进一步保证设计的合理型，并设计温度调节系统和阐述模具装配等方面。本课题最大的特点是模具由左右侧滑块组成，设计的模具结构合理，加工方便，工艺性好，能较好地运用于实际生产。 同时，在设计过程中，通过查阅大量资料、手册、标准、期刊等，结合教材上的知识也对注塑模具的组成结构（成型零部件、浇注系统、导向部分、推出机构、排气系统、模温调节系统）有了系统的认识，拓宽了视野，丰富了知识，为将来独立完成模具设计积累了一定的经验。  Abstract The graduation design topic of Taboret for injection mold design, mainly in the plastic parts for forming based on the analysis of the raw material analysis, from molding character, classification, the selection of the design of gating system, cooling system design, cores and mold structure design, structure design, launched reset lateral core-pulling mechanism design and the design of steering mechanism and so on various explains in detail the design process of the Taboret injection mold. At the same time through the reasonable selection of injection machine and the injection pressure, maximum injection quantity, clamping force, open mold stroke as well as related aspects of checking, further assure rational design of the type, and design temperature control system and expounds the mold assembly, etc. This subject is the biggest characteristic is to mould a left lateral spreads piece of composition, the design of die structure is reasonable, processing is convenient, good in usability and can be well applied to practical production. Meanwhile, in the design process, access to a large number of data, manuals, standard, periodicals, combined with the knowledge on teaching material of injection molds composition structure (m