【西门子】Protective Devices for SINAMICS G120C.pdf

s SINAMICS G120C Product Information Edition 11/2017 Protective Devices for SINAMICS G120C Table of Contents General Notes 2 1 Protective devices for IEC applications 3 1.1 IEC Fuses 3 1.2 IEC Motor Starter Protectors 4 1.3 IEC Circuit Breakers 6 2 Protective devices for UL/CSA applications 7 2.1 UL/CSA non-semiconductor fuses7 2.2 UL/CSA Type E Combination Motor Controllers 8 2.3 UL/CSA Circuit Breakers 9 A5 AB General Notes • The voltage rating of any protection device must be at least the voltage rating of the supply circuit. • Protective devices of the same type with lower current ratings may be used. • Protection devices of the same type with a lower SCCR / Icc rating may be used. • The converters must be mounted in a suitable enclosure, while ensuring the minimum enclosure sizes are observed. Overview of the approved protection devices according to UL standards • JDDZ: Fuses of any manufacturer. • DIVQ: Siemens circuit breaker • NKJH: SIEMENS Type E combination motor controllers ICC conditional short circuit current Icc: The maximum RMS value of a prospective short circuit current, available from a supply source. Short-Circuit Current Rating (SCCR): The Short-Circuit Current Rating (SCCR) is the prospective symmetrical fault current at a nominal voltage to which an apparatus or system is able to be connected without sustaining damage exceeding defined acceptance criteria. UL Certificates: FSAA, FSA, FSB, FSC UL-File E121068, Vol. 7 Sec. 7 and 8 FSD, FSE, FSF UL-File E192450, Vol. 13 Sec. 4 Prote