半导体行业ts标准.pdfVIP

Customer Specific Requirements (ISO/TS-16949) Semiconductor Commodity INITIAL RELEASE: 03-01-2003 Customer Specific Requirements (ISO/TS-16949) Semiconductor Commodity FOR USE BY SEMICONDUCTOR SUPPLIERS Page 1 of 24 Customer Specific Requirements (ISO/TS-16949) Semiconductor Commodity INITIAL RELEASE: 03-01-2003 FORWARD TO FIRST EDITION CUSTOMER REQUIREMENTS (ISO/TS-16949) SEMICONDUCTOR COMMODITY The Automotive Electronics Council (AEC) has revised the QS-9000 (second edition) Semiconductor Supplement as an evolution to utilize and align it with the ISO/TS-16949 (second edition) standard as a customer specific requirements document for the semiconductor commodity. As with the QS9000 Semiconductor Supplement, Second Edition, this document coordinates its paragraph numbering with the base document. The comprehensive document for semiconductors becomes this document coordinated with the ISO/TS-16949 standard. Some minor rewording or changes have been incorporated into this document as it evolved from the QS-9000 supplement. For continuity, the forwards to the prior editions of the QS-9000 supplements have been reproduced below. The AEC is thankful to the Supplier Quality Engineers, Component Engineers and Suppliers to our respective companies that have offered suggestions to improve this document. Thanks also go to the members of the DaimlerChrysler/Ford/General Motors Supplier Quality Requirements Task Force and to Chad Kymal, President of Omnex, for their on-going guidance and direction. Page 2 of 24 Customer Specific Requirements (ISO/TS-16949) Semiconductor Commodity INITIAL RELEASE: 03-01-2003 FOREWARD TO SECOND EDITION, QS-9000 SEMICONDUCTOR SUPPLEMENT The Automotive Electronics Council (A