unit 9 Repair of Vehicle Body 《汽车实用英语》教材.ppt

汽车实用英语;;;;;Step 1 A maintenance case is provided; Step 2 Learn the process body repair via a maintenance manual; Step 3 Require students to grasp the key terms in this task; Step 4 Try to describe the precautions of the body repair; Step 5 Students read relative material; Step 6 Assessment.;( ) 1. Stand in a direct line with the chain when using a puller on the body or frame. ( ) 2. When welding, the painted surfaces, windows and seats should be protected. ( ) 3. If a fuel leak is found, close the opening completely. ( ) 4. Wear the eye protector and head protector when welding. ( ) 5. In order to fulfill the requirements of body structure panels, medium tensile strength steel sheets with alloy are in high demand.;( ) 6. If body structure parts are heat repaired, the performance of it will be improved. ( ) 7. When welding panels with a combined thickness of less than 3 mm, use an MIG welder for plug welding. ( ) 8. If the impact beam or bracket is damaged, replace the door assembly that has the damaged beam. ( ) 9. A kink is a deformation angle on a panel that can be returned to its original shape by pulling or hammering. ( ) 10. When welding, there is a danger that electrical components will be damaged by the electrical current flowing through the body.; A floor jack is an easy use tool to elevate a car for short-term projects, such as tire and oil changes. You can lift a car with a floor jack much faster than with other jack stands, yet just as safely. Instructions: 1. Block or use chocks on the wheels. If you intend to lift the front end, brace the rear tires. Conversely, if you plan to lift the rear, brace the front wheels. For your personal safety, it’s essential to keep the car from rolling. 2. Roll the jack beneath the car. Lie down on the floor next to the jack and look under the automobile. 3. Position the jack so the contact point is beneath the frame of the car. It’s impor