hrifs1可控硅中频电源控制系统工程化设计-engineering design of hrif s1 scr intermediate frequency power supply control system.docx

problem, the amplitude detection is processed by a piecewise linearization.In consideration of SCR trigger requirements and anti-interference requirements in engineering application, this paper designed a powerful triggering and anti-interference thyristor driving circuit, on one hand it eliminate the pulse transformer and has feature on powerful triggering and low holding current ability, on the other hand, the circuit with push-pull structure can effectively filter out interference pulse. The paper also designed a phase shifting control circuit that based on FPGA, it make debugging and reuse more easily and flexible.In the paper，signal detection circuit and SCR drive circuit were tested. The resultsshow that signal detection circuit and SCR driving circuit can match the change of phase sequence in TMFPS engineering application. The linearization of amplitude detection parameters is improved. Load voltage frequency can be identified between high and low amplitude range under complex working conditions. It can also effectively filter out the engineering application of electromagnetic interference when driving SCR.Keywords: Thyristor Medium Frequency Power Supply, Signal Detection, Thyristor Drive, Engineering目录中文摘要 ········································································································ I 英文摘要 ······································································································· II 1绪论 11.1 课题背景及研究意义 ····················································································11.1.1 课题研究背景 ····················································································11.1.2 课题研究意义 ····················································································11.2 可控硅中频电源工程化现状 ···········································································21.2.1 感应加热电源发展现状 ········································································21.2.2 可控硅中频电源信号检测技术工程化现状 ································