Marvell_Cree_A19 LED灯泡驱动电源参考设计.pdf

Marvell A19 LED Reference Bulb with Cree LEDs Turn-key Design for 40W Incandescent Replacement LED Lamp PRODUCT OVERVIEW Marvell® A19 LED Reference Bulb is a turn-key solution providing manufacturing ready design for a 40W incandescent replacement LED light bulb. The design includes electrical, mechanical, thermal and optics elements. It uses Marvell’s single-stage Power Factor Correction (PFC) fly-back LED driver, the Marvell 88EM8081, along with Cree® XLamp XP-E HEW LEDs, to offer high efficiency, high power factor and low BOM cost for cost sensitive, space constrained and high temperature operated retrofit bulb applications. The entire design is ready for Energy Star® (with exception of beaming angle), Lighting Facts, EMI/EMC, CE and UL safety requirements, allowing quick time-to-market for LED lighting OEMs and ODMs. The design comes with a complete package including driver, mechanical design files and test reports for Thermal, Colorimetric and Electrical performance measurements. Figure 1. Marvell A19 LED Reference Bulb with Cree LEDs KEY FEATURES DRIVER PERFORMANCE LIGHTING PERFORMANCE • 90 to 264VAC • 475 Lumens • 0.99 PF • 3000K CCT • 10% THD • 85 CRI • 85% Efficiency MARVELL 88EM8081 LED DRIVER IC FEATURES CREE XP-E HEW LED FEATURES • Single-stage AC/DC PFC fly-back topology • High efficacy over 100 LPW with warm white • Mixed CCM/DCM modes for power factor correction • High drive current up to 1A • Precise secondary side control • Low thermal resistance: 6°C/W • Universal voltage input