诺西FLEXI基站现场操控程序.pptVIP

设置传输使用端口 时钟同步设置 配置时隙分配表 配置完毕，SEND SCF 标准RF连线 交叉连接 交叉连接 2 1 交叉连接 3 4 * In the above slide, the unit is connected for 1TRX, 1UD (== no diversity) operation. Shaded area represents unused part. Of course, either TRX in the EXxA can be used. Important: The dotted connectors can be included to prepare this for upgrading into a 2+2 2UD configuration. More information in the next category ”Bypass 2UD, 2 carriers/cell” However, if a suitable antenna were connected to the ”ANT b” connector in the above diagram, and just the dotted blue RX connector (RxB to RxB1) were connected, this would convert the