Q3培训文档.ppt

B9 China CDE Q3 training 1. B7/B8/B9 Q3IM Configuration 2. NMC Configuration 3. Efd Log 4. Alarm Clearing 5. Alarm Synchronization Action 6. Alarm format 7. Trace Analyzing B7 Q3IM Configuration ======================================== Current OMC side configuration ======================================== OMC ADDRESS : PSEL = OVDM SSEL = ses0 TSEL = tp0 NSAP = 0xac180c48 OMC SYSTEM IDENTIFIER = sbardx48 OMC NETWORK IDENTIFIER = 48 Q3 AGENT AETITLE = NONE ASN TIMER INTERVAL = seconds B9 Q3IM Configuration 我方OMC3需要NMC的相关参数 IPaddress-- NMC的ip地址 APTITLE-- 1.3.9999.1 ip AEQUALIFIER-- net PSAP-- SSAP-- TSAP-- NetworkID--(用来标示我方的OMCR是该NMC下第几个设备) 我方OMC3提供给NMC的相关参数：林武linwukeng@ B9 Q3IM Configuration 开启Q3时，通常使用method(3BK 17422 4041 RJZZA)中的PI01/03/06。当执行declareNmc.pl时，请统 一使用”-form2” 和”-rfc1006”参数。 NMCAeTitle = APTITLE+AEQUALIFIER 例如： Current OMC side configuration OMC ADDRESS : PSEL = q3 SSEL = Prs TSEL = CMIP NSAP = 0xac18fc0b OMC SYSTEM IDENTIFIER = omc3h01 OMC NETWORK IDENTIFIER = 11 Q3 AGENT AETITLE = NONE ASN TIMER INTERVAL = seconds NMC Configuration Efd Log Q3IM has 1 default efd and 3 default Logs. The default efd only filters 4 alarms, they are cTelHeartbeatReport cTelRequestCMSynchronization cTelTransferUpReady processingErrorAlarm The default Log1 saves alarms for FM, they are communicationAlarm, communicationAlarm, qualityofServiceAlarm, equipmentAlarm, environmentalAlarm The default Log2 saves alarms for CM, they are stateChange, attributeValueChange, cTelObjectCreation, cTelObjectDeletion, cTelRequestCMSynchronization The default Log3 saves alarms for COM, they are cTelTransferUpReady Efd Log (Cont) According to specification, when Q3im start up on OMCR, only default elog and EFD was created, then only default alarms were s