毕业设计（论文）基于FPGA的等精度频率计设计.docVIP

毕业设计（论文）--基于FPGA的等精度频率计设计 Abstract Abstract: According to the principle of measurement etc precision, proposed based on FPGA digital frequency of design project progress. Introduces the principle of frequency measurement with etc precision and synchronous, and comparative analysis the measurement precision and features with the traditional measuring method. With more than proved step frequency method with etc precision and synchronous has periodic advantage. Based on the ZhouLiGong company production EasyFPGA030 development board, in Libero8.5 integrated software development environment, using hardware VerilogHDL programming language to write counter module, divide module. With Synplify synthetically, with ModelSim simulation giving simulation results, Designer layout wiring. Using FlashPro download the design to development board. Use MUC and LED digital tube to show the measurement results. Use 74LS244 tristate buffers and transistor to amplify current that LED digital tube brighter. Use 74LS14 Schmitt toggle integration to plastic signal. Through simulation and download to the development board, can achieve the function of frequency measurement etc precision, Frequency measurement range from 1Hz to 1MHz. Proof of this scheme is feasible, Keywords: equal precision, frequency measurement, FPGA, Libero, HDL 不要删除行尾的分节符，此行不会被打印目 录 摘 要 I Abstract II 第1章 绪论 1 1.1 课题背景 1 1.2 课题来源、目的和意义 2 1.3 本文结构 3 第2章 主要研究内容 4 2.1 引言 4 2.2 数字频率计主要技术指标[4] 4 2.3 常用直接测频的方法 5 2.4 等精度频率测量算法 5 2.5 等精度测量误差分析 6 2.6 总体设计 7 2.7 本章小结 7 第3章 FPGA设计 9 3.1 引言 9 3.2 计数器模块 11 分频模块 12 预置闸门模块 13 实际闸门模块 13 计数Nx模块 14 计数Ns模块 14 通信控制模块 15 计数器各模块连接详图 15 3.3 除法器模块 16 除法控制器 17 除法运算器 19 通信信号转换模块 21 除法器各模块连接详图 21 3.4 本章小结 22 第4章 显示及信号整形设计 24 4.1 引言 24 4.2 单片机显示模块 25 单片机显示软件件设计 28 单片机显示硬件设计 29 4.3 信号整形模块 30 4.4 本章小结 31 第5章 总体设计验证 32 结 论 34 致 谢 36 参考文献 37 千万不要删除行尾的分节符，此行不会被打印。在目录上点右键“更新域”，然后“更新整个目录”。打印前，不要忘记把上面“Abstract”这一行后加一空行绪论 课题背景 EDA Electronic Design Automation――电子设计自动化 代表了当今电子设计技术的最新发展方向，