圆盖注塑模具设计.doc

摘要： 关键词: Yen to build injection mold design Abstract ：The main topic covered for a round of injection mold design, the materials for the acrylic dome clear - butadiene - styrene (ABS), is commonly found in industrial production of a protective cover products. Through the process of plastic parts for analysis and comparison, the final design of an injection mold. The product mix from technology issues, and specific mold structure of the casting mold system, mold forming part of the structure, side pumped body, top of the system, cooling system, the choice of injection molding machine and related calibration parameters are detailed design, at the same time and developed a simple process dies. Through the entire design process that the mold can be achieved by the plastic parts processing requirements. Designed in accordance with the subjects main task is to build a round plastic injection mold design, that is, the design of an injection mold to produce plastic products in order to achieve automation to increase production. Plastic parts for the specific structure of the mold is the spokes-style single-gate injection mold surface. Key words： Injection mold round cap. 目录 设计题目……………………………………………………………1一:塑件的工艺性分析………………………………………………21、塑件的原材料分析………………………………………………22、塑件的结构工艺性分析…………………………………………33 : 塑件的尺寸精度分析 ……………………………………………34: 塑件表面质量分析………………………………………………4二: 成型设备选择与模塑工艺规程编制………………4 1:计算塑件的体积…………………………………………………42: 注塑机的初步选择………………………………………………43: 塑件模塑成型工艺参数的确定………………………………54: 填写模塑工艺卡…………………………………………………6三: 注射模的结构设计……………………………………71: 分型面的选择…………………………………………………72: 型腔数目的确定及型腔的排列………………………………83: 浇注系统的设计………………………………………………84: 型芯、型腔结构的确定………………………………………125: 推件方式的选择………………………………………………146: 侧抽机构………………………………………………………14四: 注射模设计尺寸计算……………………………141: 成型零件尺寸计算……………………………………………142: 抽芯机构零件设计与计算……………………………………163: 模板尺寸设计…………………………………………………19五: 冷却系统的设计………………………………………201、动模模镶件的冷却…………………………………………202、定模镶件的冷却……………………………………………20六:注射机有关参数的校核…………………………………21七:模具零件的配合关系……………………………………22模