第二章 delphi面向对象的编程方法(三)（The second chapter is Delphi object-oriented programming method (three)）.docVIP

第二章 delphi面向对象的编程方法(三)（The second chapter is Delphi object-oriented programming method (three)） The statement section of the 2.1.8.4 procedure and function The statement of a procedure or function starts with begin and ends with end. The function needs a return value. You can assign the return value to the function name, or you can assign the return value to the Result variable. The following routine assigns the return value to the function name: Function CalculateInterest (Principal, InterestRate:, Double): Double; Begin CalculateInterest: = Principal * InterestRate; End; It is also possible to assign the return value to the Result variable, and then the above program changes to: Result: = Principal*InterestRate; Here is a call to this function: InterestEarned: =CalculateInterest (2000,0.012); The processes and functions behind the Implementation can and can only be used by the event handling of this library element. To make the process and function can be used in other library unit, you will need the interface part of the title section of the procedure or function on the base unit, and the whole process or function with title in the inplementation part of the library unit, and the uses clause in the library unit to access the process or function of added to the description of the process or function of the base unit. Recursive call to the 2.1.8.5 function In Object Pascal, the procedure or function must first explain and then call. The NoValue function above must be explained and executed before the event handler using it, otherwise the program will report an error with an unknown identifier. The above rules are exceptions when recursive calls are made. Recursive call means that the function A calls the function B, and the function B calls the function A. In recursive calls, the function takes precedence, i.e., the last word in the title of the function or process is added to the reserved word forword. The following routine is a typical example of a recursive call