波动光学建模asap编程.doc

附錄 3A 第 3 章的程式集 Scripts For Chapter 3 下列 ASAP 的程式參閱第 3 章”建造器及幾何先前準備” 程式3-1 !!THIS IS THE COMMAND SCRIPT PRODUCED BY THE BUILDER. !!SEE THE REFERENCE MANUAL FOR OTHER SYSTEM UNITS CHOICES. UNITS MM 程式3-2 !!THIS IS THE COMMAND SCRIPT PRODUCED BY THE BUILDER. !!SEE THE REFERENCE MANUAL FOR OTHER WAVELENGTH UNITS CHOICES. WAVELENGTHS 550 NANOMETERS 程式3-3 !!THIS IS THE COMMAND SCRIPT PRODUCED BY THE BUILDER. MEDIA; 1.613 SK4 MEDIA; 1.606 F15 !!THIS SCRIPT IS REWRITTEN HERE IN THE FOLLOWING PREFERRED !!MANNER IN ORDER TO IMPROVE READABILITY. !!THE COMMENTS ARE ADDED FOR EXPLANATION. MEDIA 1.613 SK4 !!AGLASSMEDIUMSK4HASANINDEXOFREFRACTION=1.613 1.606 F15 !!AGLASSMEDIUMF15HASANINDEXOFREFRACTION=1.606 ASAP Primer / 建造器及幾何先前準備 3-55  程式3-4 !!THIS IS THE COMMAND SCRIPT PRODUCED BY THE BUILDER COATING PROPERTIES; 0 1 TRANSMIT . COATING PROPERTIES; 0 0 ABSORB !!ONCE AGAIN THIS SCRIPT IS WRITTEN HERE IN THE FOLLOWING !!PREFERRED MANNER IN ORDER TO IMPROVE READABILITY. !!COMMENTS ARE ADDED AFTER THE COATING DEFINITIONS. COATING PROPERTIES 0 1 TRANSMIT !!REFLECTIVITY = 0%; TRANSMISSIVITY = 100% 0 0 ABSORB !!REFLECTIVITY = 0%; TRANSMISSIVITY = 0% 3-56 ASAP Primer / 建造器及幾何先前準備  附錄 4A 第 4 章的 ASAP 程式集 ASAP Scripts For Chapter 4 下面的 ASAP 程式是參考在第 55 頁“建造器及預視幾何形狀”。 程式 4-1 !! THIS IS THE COMMAND SCRIPT PRODUCED BY THE BUILDER !! THIS IS CALLED THE UGLY FORM. ENT OBJECT; OPTICAL Z 0.0 44.55 0 ELLIPSE 16.9 16.9 L1.FRONT !! IN THE BUILDER THE DEFAULT FORM OF A SURFACE IS AN OBJECT. !!INTHECOMMANDMODETHEDEFAULTFORMOFASURFACEISANENTITY. !! SO IN CREATING SCRIPT FROM THE BUILDER AN OBJECT COMMAND IS ADDED. !! THE FOLLOWING EDITED SCRIPT IS THE PREFERRED FORM OR GOOD FORM. SURFACE OPTICAL Z 0.0 44.55 0 ELLIPSE 16.9 16.9 OBJECT L1.FRONT !! NOTE THAT THE SCRIPT USES THE OPTICAL COMMAND. !! SPHERICAL IS A FORM OF THE OPTICAL COMMAND SHOWN ONLY IN THE BUILDER. !! THE VALUE 0 BEFORE THE WORD ELLIPSE IS THE CONIC CONSTANT. !! THE CONIC CONSTANT FOR A SPHERICAL SURFACE IS 0. 程式 4-2 !! THI