半自动折叠封箱机,中英文版4.docVIP

 Semi-automatic folding cartoon sealer manual instruction SDW-FC500   Introduction 1.1 Safety rule 1.1Technical information 1.2Installation 1.2 Installation adjustment 2.0 ～ 2.1 Cleaning and lubrication 2.1 Electric control principle diagram 3.0 Pneumatic control principle diagram 3.1 Trouble shooting 4.0  Stick belt unit group 5.0～5.2 Machine frame group 6.0～6.2 Drive group? 7.0～7.1 Knifehit link rod group 8.0～8.1 Woodgroup of knife beam9.0～9.1 Electricity control case 10.0～10.1 Wearing parts list 11.0  Thanks you choose our machine This machine is solid in construction,use and maintenance is more simple and easy。 When u use this machine,please read this manual detail research,to obtain higher operation efficiency. Safety rules \\ Dangerous mark Gas warning signs Dangerous signs This machine should not be operated by non-experience stuff Please obey rules for predict and warning signs Do not remove or change any of a protective device Do not do some cleaning or maintenance while machine works. While the machine starts moving should close cover. Do not pour water when it sudden fire. Please operate the machine follow manual instruction When it suddenly stop,please shut down all power supply   Model： SDW-FC500 Sealing speed：800～900case/h Sealing size：Length( L ) ：L200～600mm Width(W) ：W150～500mmHeight(H) ：H110～500mm adhesive tape：48～60～75Wmm×1000ML Height from ground：570～770mm Overal dimension：L1780*W940*H1510mm TW： ≈180KG Noise level：Max. 80dBA Power：Max 0.2KW AC(optional)： 220V/50Hz/60Hz/1Ph 380V/50Hz/60Hz/3Ph Gas consume： 3kgf/cm2 100nl/min  Installation Such as power supply,voltage,rate and so on equipment should correspond with the rule which write on the data plate Inserting plug Control machine runs by working desk’s Swith Attention: Machine installed near power supply. Attention: In case of opening power control case should cut down power