（参考）基于at89s52的无线温度测量系统毕业论文.docVIP

摘 要 温度作为工业、农业生产中最常见的和最基本的参数之一，我们常常需要对温度进行检测和监控，利用微型机进行温度的采集处理，数据存储以及实时控制等来提高工作效率、保证产品质量。本文设计了一个基于AT89S52的高精度短距离无线传输的温度测量系统。发送端的温度传感器AD590采集到的模拟信号经过数据处理后送给单片机，单片机通过无线传输模块nRF24L01将数据发送到接收端，接收端的nRF24L01接收到数据后送给单片机进行数据处理。文章在简要介绍AT89S52、AD590、nRF24L01无线传输模块、AD7896、AD623以及液晶模块的基础上，详细介绍了系统方案的选择，以及无线温度测量系统的硬件和软件设计的过程。 关键字：AT89S52；温度测量；AD590；nRF24L01 Abstract Temperature as one of the most common and the most basic parameters in industrial, agricultural production, We often need to detect and monitor temperature, use microcomputer for temperature acquisition and processing, data storage and real-time control to improve the work efficiency, and ensure the quality of products .This article describes the design of a high precision temperature measure- ment system of short distance wireless transmission based on the AT89S52. After data processing, analog signals acquired by the temperature sensor AD590 of the sender is sended to the single chip microcomputer. By wireless transmission module, nRF24l01 sends the data to the receiving end. After receiving the data, the receiving end of the nRF24l01 sends it to the single chip microcomputer for data processing. This article briefly introduces the AT89S52, AD590, nRF24l01, AD7896, AD623, wireless transmission module and liquid crystal module basis and introduces in detail the choice of the scheme about this system, as well as the wireless temperature measurement system hardware and software design process. Keywords: AT89S52;temperature measurement;AD590;nRF24l01; 目 录 摘 要 I Abstract II 第一章 绪 论 1 1.1 课题的背景与意义 1 1.2国内外研究状况及相关领域中已有的研究成果 1 1.3方案的选择 2 1.3.1信号采集与放大模块 2 1.3.2模数转换模块 3 1.3.3单片机模块 3 1.3.4无线发射模块 4 1.3.5显示模块 4 1.4 设计要求 4 1.5 本章小结 4 第二章 硬件系统的设计与实现 5 2.1单片机模块 6 2.1.1 AT89S52简介 6 2.1.2模块原理图 8 2.2 温度采集与放大模块 9 2.2.1 AD590简介 9 2.2.2 AD590的工作原理 10 2.2.3温度采集电路 11 2.2.4放大电路 12 2.2.5信号电压调整电路 13 2.3模数转换模块 15 2.4无线发射模块 16 2.4.1引脚功能及描述 17 2.4.2工作模式 18 2.4.3工作原理 18 2.5液晶显示模块 20 2.5.1 LCD1602管脚介绍 20 2.5.2 LCD1602的指令说明及时序 21 2.6电源模块 22 2.