德玛格工艺注塑指导 Word 文档.doc.pdf

In-Mold Decoration In-mold Textile Lamination – Machine Technology and Process Control H a n d o u t – I n - m o l d T e x t i l e L a m i n a t i o n § In-mold Textile Lamination – Machine Technology and Process Control 2 • Historical development 2 • The structure of in-mold textile laminated components 3 • Special machine equipment for in-mold textile lamination 10 • Mold technology for in-mold textile lamination 11 • Automation equipment for in-mold textile lamination processes 12 Page 1 of 16 2004-03-25 Handout – In-mold Textile Lamination In-mold Textile Lamination – Machine Technology and Process Control Today’s processors can choose from of a variety of surface finishing techniques designed to en- hance the optical and tactile characteristics of an injection molded product. In addition to the classic methods such as metallization, galvanizing or decorative coating of injection molded components, the market also offers injection molding alternatives which integrate decoration into the injection molding process such as in-mold-decoration (IMD) or in-mold-labelling (IML). One such technique, called in-mold textile lamination, involves injection onto the back of materials such as grained film, textile material or velours. This paper deals with the in-mold lamination of smooth, cut-to-size material blanks with textile prop- erties of a multi-layered design which are suitable for forming. Thermoformed film, which is handled by grippers and directly inserted into the mold, will not be discussed in this paper. § Historical development In-mold tex