三菱 PLC MELSECA 伺服定位模块 A1SD75P1P2P3S3 用户手册 硬件.pdf

A1SD75P1-S3/P2-S3/P3-S3 Positioning Module User’s Manual (Hardware) Thank you for buying the Mitsubishi general-purpose programmable logic controller MELSEC-A Series Prior to use, please read both this manual and detailed manual thoroughly and familiarize yourself with the product. MODEL A1SD75S3-U-E(H/W) MODEL 13J882 CODE IB(NA)-66732-E(0412)MEE 1996 MITSUBISHI ELECTRIC CORPORATION SAFETY PRECAUTIONS (Always read before starting use) When using Mitsubishi equipment, thoroughly read this manual and the associated manuals introduced in the manual. Also pay careful attention to safety and handle the module properly. These precautions apply only to the installation of Mitsubishi equipment and the wiring with the external device. Refer to the user’s manual of the CPU module to be used for a description of the PLC system safety precautions. These SAFETY PRECAUTIONS classify the safety precautions into two categories: DANGER and CAUTION. Procedures which may lead to a dangerous condition and DANGER cause death or serious injury if not carried out properly. Procedures which may lead to a dangerous condition and CAUTION cause superficial to medium injury, or physical damage only, if not carried out properly. Depending on circumstances, procedures indicated by CAUTION may also be linked to serious results. In any case, it is importa