META(英文).ppt

Introduction ofMETA “META” – Calibration and Testing Tool “META” - Mobile Engineering Testing Architecture RF tool Power measurement measure the power of indicated channel RF tool (cont.) Gain sweep measure the power of indicated channel by the different gains RF tool (cont.) Sub band path loss window Compensate the difference of the downlink cell power the average power of measurement by RF module RF tool (cont.) Continue RX Observing the RX IQ RF tool (cont.) Continue TX Observing the TX IQ User can indicated TX IQ pattern PA is not turned on RF tool (cont.) TX level and profile Fine tune TX configuration and profiles PA is turned on RF tool (cont.) Level and Ramp setting User can setup PCL DAC value ramp up/down profile for each PCL RF tool (cont.) AFC control Used to measure the AFC slope initial value NVRAM editor Used to read or write record in NVRAM Audio Tool - Acoustic FIR coefficient editor Used to read or write audio coefficient from NVRAM or file Audio Tool - Audio testing Used to test weather audio device generate correct frequency Audio Tool - Ring composer Used to compose iMelody song Audio Tool – Play song using ID Baseband Tool - Auxiliary ADC Used to measure ADC slope offset Baseband Tool - Peripheral register read/write Used to read/write the register of baseband chip Note : BB register address : 0 0 0 MMI Data Download Used to download graphic files and Midi, iMelody files IMEI Download Used to read/write IMEI form/to NVRAM or file Get Version Used to get H/W and S/W version Barcode Download Used to read/write barcode form/to NVRAM or file Update Parameter Used to update RF and ADC parameter FAT Editor Used to update read, write, delete FAT file META Lab S/W Architecture META Lab S/W Architecture (cont.) META-DLL Responsible for the communication with target handset, handling test commands