故障诊断学可靠性工程.doc

机械故障诊断学及可靠性工程 MECHANICAL FAULT DIAGNOSTICS AND RELIABILITY ENGINEERING 作业题目 可维护系统有效度仿真 作者姓名 作者学号 学科专业 机械设计及理论 指导教师 机械故障诊断学及可靠性工程 可维护系统有效度仿真 硕士研究生 ： 硕士生学号 ： 导师 ： 学科专业 ： 机械设计及理论 所 在 单 位 ： 机械工程学院 Mechanical fault diagnostics and Reliability Engineering the Simulation of Validity for Maintainable system 摘 要 混联可维护性系统的有效性仿真是一种基于计算机计算，借助于一定的编程软件而进行的离线模拟仿真技术。这一仿真技术，对现实的实验研究以及产品的实际生产有着重要的预测和指导作用。 本文主要针对由三类零件所组成的混联系统进行有效度的模拟仿真，当然，数学模型也做了相应简化，忽略了零件维修时间。通过0-1分布函数产生的伪随机数，运用威布尔分布函数得出相应的产品使用寿命，由此，对故障零件的故障时间进行模拟仿真，由于计算机的计算效率很快，所以模拟的零件样本空间可以取得足够大，单个零件的采样截止时间也可以取得很大。根据蒙特卡罗算法，通过对每一类零件的样本空间进行取样，并统计一定时间间隔的故障个数，最终运用MATLAB进行编程进而模拟出整个混联系统的有效度。 关键词：混联系统；威布尔分布；蒙特卡罗算法；有效度仿真； Abstract The simulation of validity Maintainable hybrid system is a offline simulation technology, which is base on computer calculation by using certain programming software. This simulation technology plays an important role in the the prediction and guidance for real experimental study and the actual production of products. This paper mainly gives the simulation of validity for the system which is composed by three kinds of parts. By the way, the corresponding mathematical model has been simplified, ignoring the repairing times of the parts. a serial of pseudo-random numbers are generated by 0-1 distribution function. By using the Weibull distribution function, corresponding product using lives are obtained, whereby we can simulate the fault time of the part. Due you the perfect computational efficiency, the simulated parts sample space can get as big as possible, at the same time, the sample deadline for individual parts can also get very large. According to Monte Carlo algorithm, by getting the number of parts in each type of sample space and the number of fault parts in certain time interval t and then eventually programming by using MATLAB, we can finally simulate the validity of the entire hybrid system. Keywords: Hybrid systems; Weibull distribution; Monte Carlo algorithm; Simulation of