离心机模型试验，混凝土在砂土上的承载能-毕业论文外文翻译.docx

附录A 外文文献及其翻译Japanese Geotechnical Society Special PublicationThe 15th Asian Regional Conference onSoil Mechanics and Geotechnical Engineering Bearing capacity of hybrid suction foundation on sand with loading direction via centrifuge model testJae Hyun Kim i), Surin Kim i), Dong Soo Kim ii), Jun Ung Youn iii), Dong Joon Kim iv) and Sung Hyun Jee v)Ph.D Student, Department of Civil Engineering, KAIST, 291 Daehak-Ro, Yuseong-Gu, Daejeon, 305-701, Republic of Korea.Professor, Department of Civil Engineering, KAIST, 291 Daehak-Ro, Yuseong-Gu, Daejeon, 305-701, Republic of Korea.Director, Hyundai Engineering and Construction Co., Ltd,446-912, Yongin-si, Republic of Korea.Chief research engineer, Hyundai Engineering and Construction Co., Ltd,446-912, Yongin-si, Republic of Korea.General manager, Hyundai Engineering and Construction Co., Ltd,446-912, Yongin-si, Republic of Korea.ABSTRACTSuction caisson is widely used to support offshore structure. However, this type of foundation may not provide sufficient resisting capacity economically under external loads. Recently, to give an increased capacity on the foundation, hybrid foundation concept was proposed to satisfy engineering needs as well as cost reduction of structures. Hybrid foundation concept is combination of skirted mat and suction caisson (s). Suction caisson (s) is fitted on the mat foundation intended to increase load capacity. This paper investigates the behavior of a hybrid suction foundation installed in sand layer for vertical and lateral loads, respectively. A series of centrifuge test have been conducted to assess the load capacity of the hybrid foundation and compared to those of the conventional single suction caisson. The primary goal of this study is to comprehend the effect of the mat compartment on foundation behavior under loading directions, and corresponding bearing capacity. Finally, feasibility of the hybrid foundation for offshore foundation was confirmed.Keywords: suction caisson, hybrid foun