节能省时多功能化学锂池充电系统-毕业论文外文翻译.docxVIP

外文文献及其译文外文文献：MAXIM :Cost-Saving Multichemistry Batter-Charger System，2002MAX846A chip brief 1.MAX846A pin power Maxim produced MAX846A is a low-cost, multi-purpose battery charge controller, using 16-pin QSOP package, can alone constitute a lithium-ion battery charger can also be under the control of the microcontroller of lithium-ion batteries, nickel hydride batteries, nickel-cadmium rechargeable batteries. MAX846A pin arrangement as shown in Figure 4-1, the main pin function as follows: ① DCIN: an external DC power supply output, 3.7 ~ 20V. ② VL: 3.3V, 20mA, 1% linear regulator output.③ CC1: current regulation loop compensation side. ④ CCV: compensation for terminal voltage regulation loop. ⑤ VSET: floating voltage reference adjustment input. ⑥ ISET: current settings and control input terminal. ⑦ OFFV: voltage regulation loop to prohibit side. ⑧ CELL2: Programming the number of charging power supply terminal.⑨ BATT: Battery input. ⑩ CS +: high-voltage current source and amplifier input. ○ 11 CS-: low-voltage current source and amplifier input. ○ 12 DRV: External transistor base-gated input. 2.MAX846A the internal structure of MAX846A Multi-Function Battery Charger Controller from 3.3V high-precision, low-dropout linear regulator power supply as well as high precision voltage reference source, voltage and current regulator three parts. Linear regulated power supply output voltage VL is twice the reference voltage can provide 20mA for external load current. Low-Dropout Regulator power supply has short circuit protection, PWROK (Power-OK) for the micro-controller provides the reset signal can be controlled lithium-ion battery charge current. High-precision voltage reference source for lithium-ion battery to provide accurate float voltage, it is with a precision of 2% of the 20k resistor connected to float voltage can be set by an external resistor. External resistors should have 1% accuracy, because a direct impact on the external resistor float voltage accuracy, wh