通风模型在掘进的应用和加拿大炭资源在社会和政治上限制的影响毕业论文外文翻译.docVIP

附录A Ventilates the model in the tunneling application with Canada coal resource the influence which limits in the society and politics The extraction of minerals and coal at greater depth, employing higher-powered machinery to increase production levels has imposed an increased burden on ventilation systems to maintain an acceptable working environment. A deterioration in the climate experienced within these workings may also adversely affect the health and safety of the workforce. In the UK, mineral extraction is now being practiced at depths of over 1000 m. In addition, the adoption of continuous miner and tunnel bolting support methods has permitted improved development rates to be achieved at the cost of increased emissions of dust, gas and heat and humidity. There is a recognized need to improve the efficiency in the design and operation of auxiliary ventilation systems to maintain an adequate underground environment and climate. Any improvement achieved in the quality, quantity and control of the delivered ventilation will assist in the provision of improved gas and dust dilution and climatic control. Due to the constraints imposed by the mining method, there may be an economic or practical limit to the climatic improvement that may be obtained by the sole use of ventilation air. Where this limit is identified, there may be the need to consider the selective application of air-cooling systems. The paper details the construction of a computer based climatic prediction tool developed at the University of Nottingham. This work builds upon earlier research (Ross et al., 1997, Proceedings of 6th International Mine Ventilation Congress, SME, Littleton, CO, pp. 283–288) that developed a prototype model for short tunnel developments. The current model predicts the psychrometric and thermodynamic conditions within long rapid development single entry tunnel drivages. The model takes into account the mass and heat transfer between the strata, water, machinery and the ve