逆变电源毕业设计(论文)---基于TL494逆变电源设计.docVIP

基于TL494逆变电源设计 摘 要 本设计主要应用开关电源电路技术有关知识，涉及模拟集成电路、电源集成电路、直流稳压电路、开关稳压电路等原理，充分运用芯片TL494的固定频率脉冲宽度调制电路及场效应管（N沟道增强型MOSFET）的开关速度快、无二次击穿、热稳定性好的优点而组合设计的电路。该逆变电源的主要组成部分为：DC/DC电路、输入过压保护电路、输出过压保护电路、过热保护电路、DC/AC变换电路、振荡电路、全桥电路。在工作时的持续输出功率为150W，具有工作正常指示灯、输出过压保护、输入过压保护以及过热保护等功能。该电源的制造成本较为低廉，实用性强，可作为多种便携式电器通用的电源。 关键词：过热保护，过压保护，集成电路，振荡频率，脉宽调制 Inverter Power supply Design Based on TL494 ABSTRACT The design applying the switching power source circuit technology in connected. Relating with knowledge about what imitate integrated circuit、power source integrated circuit、power amplification integrated circuit and switching regulated voltage circuit on principle. Sufficient apply chip TL494 fixed-frequency pulse width modulation circuit and field effect transistor (N channel strengthen MOSFET) whose switch speed quick, nothing secondary Break down and hot stability good merit to design circuit. Owe the inverter main part ingredient by DC/DC circuit、importing the over-voltage crowbar circuit、exporting an over-voltage crowbar protect a circuit、overheat protective circuit、DC/AC shifts circuit、oscillating circuit and entire bridge circuit. Continuing for during the period of the job exports power functions such as being 150 W, having the regular guiding lights working, exporting an over-voltage crowbar, importing the over-voltage crowbar and overheat protective. The cost of manufacture being a power source of turn is comparatively cheap, the pragmatism is strong, and it has a function annex to the various portably type. KEY WORDS: over heat protective, over-voltage integrated circuit (IC), oscillating frequency, pulse width modulation (PWM). 目　录 前　言 1 第1章 简介 3 1.1 概述 3 第2章 逆变电源原理与构成 4 2.1 逆变电源的基本构成和原理 4 2.1.1 逆变电源的基本构成和原理 4 2.1.2 逆变电源的技术性能指标及主要特点 7 2.2 逆变电源的主要元器件及其特性 7 2.2.1 TL494电流模式PWM控制器 7 2.2.2 场效应管 11 2.2.3三极管 12 第3章 各部分支路电路设计及其参数计算 13 3.1 各部分支路电路设计及其参数计算 13 3.1.1 DC/DC变换电路 13 3.1.2输入过压保护电路 14 3.1.3输出过压保护电路 15 3.1.4 DC/AC变换电路 16 3.1.5 TL494芯片Ⅰ外围电路 18 3.1.6 TL494芯片Ⅱ外围电路 18 3.1.7逆变电源的整机电路原理图 1