高速公路毕业的设计总说明.docVIP

京港澳高速公路复线长沙至湘潭段第4标段初步设计（K0+000～K2+252.133） 摘 要：本设计为京港澳高速公路复线长沙至湘潭段第4标段初步设计。设计车速km/h，。 本设计路线的纵断面、横断面涵洞路面设计。纵断面设计是根据道路等级、沿线自然条件和物控制标高等，确定路线合适的标高、各坡段的纵坡度和坡长并设计竖曲线横断面设计是根据，参照“标准横断面图”，画出路幅宽度，填或挖的边坡线，关键词：路基路面The preliminary design of jing gang ao highway railway Changsha to Xiangtan section of the fourth paragraph （K0+000～K2+252.133） Abstract: The design of jing gang ao Expressway and Railway Changsha to Xiangtan section of the fourth section of the preliminary design. The design of the highway’s speed is 100km/h, the roadbed width is 26m is according to the traffic volume, the topography had gived. The design includes the line plane, vertical section, cross section, the subgrade and pavement and drainage, drainage, culvert, asphalt concrete pavement design, design and construction design and budget of cement concrete pavement. The plane circuit design is given according to the starting point and end point, determine the main control point, initially identified two route schemes, the schemes and select the best scheme. Longitudinal section design is according to the grade of road, along the natural conditions and the structure control standard higher, to determine the appropriate elevation line, the slope of the longitudinal slope and slope length, and the design of vertical curve. Cross section design is illustrated according to the design data, and according to standard section, painting outlet width, slope line fill or digging, and design of retaining structures. Drainage system design is based on cross-sectional ditch bottom elevation determine the flow direction, and set the culvert. Pavement design is the design of pavement structure according to the highway, traffic volume. Including the construction organization design: technical design, construction design, and estimate. The related tables, drawings attached. Keywords: highway design, subgrade, pavement, drainage, protection. 第一章 总说明 1.1 基本资料 1.11 任务依据 根据所给的参数及设计任务书的要求，根据所给交通量计算出年平均日交通量，按等级设计成双向四车道的一级公路,设计车速为