外文翻译 基于TMS320VC5402自适应FIR滤波器设计.docxVIP

附录A Implementation of Adaptive FIR Filter Based on TMS320VC5402 Wang Xiaojuan Zhang Ze (Department of Automation, College of Sciences of Technology, Inner Mongolia University, Hohhot 010021 China, ) Abstract The article introduced the design and implementation of the adaptive FIR filter based on DSP (Digital Signal Processor). Firstly, simulate experiment of the adaptive FIR filter structure and algorithm is carried out by MATLAB, and adaptive filtering of the input signal added Gauss noise is performed. Simulation waves are given, and the reference data for the DSP designing is provided. On this foundation, TMS320VC5402 DSP chip is selected as the center processor to design and implement the adaptive FIR filter. The hardware system design module, the software system design flow chart and the related assembly code are given. The uniformity of simulation results and measurement results and the filter effect is satisfied. Keywords: Adaptive FIR filter, TMS320VC5402, LMS algorithm. 1 Introduction Adaptive filter is the one of the modern filter. It is an important application of adaptive signal processing that was developed in the 1940s. Adaptive filter has been used widely in system identification, noise canceller, adaptive line enhance, adaptive equalization of communication channel, linear predication, adaptive array antenna and so on. Adaptive filter is opposite to fixed coefficients filter. During digital signal processing, a number of unpredictable signals, noises or time-varying signals often need to process, it is impossible to achieve optimal filtering for fixed coefficient filter, so adaptive filter must be designed to track the change of signal and noise. The unique structure and instruction of TMS320VC5402 DSP provide the convenient condition for designing adaptive filter. 2 Principle of Adaptive Filter Adaptive filter consists of two basic parts: the filter which applies the required processing on the incoming signal which is to be filtered, and an adaptiv