污水厂毕业设计 污水理厂尾水脱氮工艺的设计.docVIP

题 目 污水处理厂尾水脱氮工艺的设计 学 生 学 院 专 业 班 级 校内指导教师 专业技术职务 校外指导老师 专业技术职务 二○一〇年六月  污水处理厂尾水脱氮工艺的设计 摘 要：本次毕业设计是根据所给设计题目“污水处理厂尾水脱氮”进行设计，根据污水处理厂日污水量和污水处理厂尾水水质特征和参照过相应污水处理厂设计标准，最终采用 “MBR”回用处理工艺进行尾水处理。内容囊括了：设计的具体内容（设备的选型以及计算）、设计中遇到的问题、针对问题具体的解决方法、方案的发展情况以及在设计中的工程概预算。最终将设计顺利完成。 本设计中的“MBR”指膜生物反应器。MBR是把活性污泥法和超滤工艺结合处理，首先通过活性污泥来去除水中可生物降解的有机污染物，然后采用膜将净化后的水和活性污泥进行固液分离。采用MBR主要考虑到当代城市用地日趋紧张，更适合用于城市污水处理厂污水回用，在已有污水处理厂的污水处理基础上进行深度处理，MBR反应器的使用可以实现占地少、工艺简单、运行管理方便、投资省、运行费用低等优点，满足城市污水处理厂现状条件。 关键词： MBR；深度处理；中水回用Sewage Treatment Plant Design Water Removal Process Abstract：The graduation project is designed according to the subject of the end of the water removal sewage。According to the quantity of sewage water treatment plant and sewage treatment plants and water quality characteristics and the end of the light through the appropriate design standard for sewage treatment plant。Finally adopted MBR back end with the treatment process for water treatment. Contents include: the design of specific contents (equipment selection and calculation), design problems, specific solutions for the problem, program development and design of the project budget. The successful completion of the final will be designed. The design of the MBR means the membrane bioreactor. MBR is the activated sludge and ultrafiltration combined with treatment, first by activated sludge for removal of biodegradable organic pollutants, and then will be purified using membrane activated sludge of water and solid-liquid separation. MBR mainly by taking into account the growing tensions of contemporary urban land more suitable for urban sewage treatment plant wastewater reuse, The existing sewage treatment plant sewage treatment based on the depth of processing, MBR reactor can achieve an area o