雾化式油脂喷涂机毕业论文.doc

雾化式油脂喷涂机毕业论文 摘 要 我国Abstract Adding technology in the heat-sensitive trace components in the production of Chinas feed industry has developed to a certain level , has achieved some success in some respects , present in the feed of heat-sensitive trace components add technical fields, there are still some very difficult technical challenges need to be solved ,mainly in the thermal trace components pretreatment link, such as : heat-sensitive trace components added after the material measurement accuracy is not high ; add uniformity is difficult to grasp and control ; added after the heat-sensitive trace components late loss (peeling, oxidation, etc.) ；heat-sensitive trace components add design and rational allocation of the solution formula ；heat-sensitive trace components added after process improvement ; add trace components save studied after different unclear , technical Development for the feed of heat-sensitive micro-components to add , identified the subject of this graduation . Introduces the heat-sensitive trace components?added after?the?design ideas, design, main components of the design features and performance parameters to determine and this machine works . The rack of the machine，the body uses the castings, and easy installation; Grease spraying the feed from the linear shaker drive; The completion of the atomized spray of grease by the centrifugal fan and nozzle compatible; Between the lid and the box with the bolts to connect fixed；Cabinet with rack support, using the-shelf bolt connection fixed . Keyword : feed industry ; heat-sensitive ; post-processing to add machine ; trace components 目 录 摘 要 I Abstract II 目 录 1 1.绪论 1 1.1 课题研究背景，目的及其意义 1 1.2 油脂的作用 1 1.3 进行后喷涂技术的必要性 2 1.4 后喷涂工艺的类型 2 1.5 国内外后喷涂工艺的添加系统简介 8 2.设计方案的确定 10 2.1 选题的设计思想，设计方法及改进 10 2.2 预期结果 10 2.3 本章小结 10 3.离心风机雾化式油脂喷涂机的总体设计 11 3.1 离心风机雾化式油脂喷涂机的设计任务 11 3.2 滚筒式油脂喷涂机的结构 11 3.2.1 颗粒流量控制装置 11 3.2.2 滚筒部分 11 3.2.3 供油部分 12 3.2.4其性能特点如下： 12 3.2.5 其主要技术参数： 12 3.2