无线局域网-复习总结2018(new).pptVIP

CCEE Wireless LAN Data interleaving Punctured Coding (r = 2/3) Source data Encoded data Bit Stolen Data (sent/received data) Bit inserted Data Decoded data CCEE Wireless LAN Pad bits (PAD) The number of OFDM symbols, NSYM; the number of bits in the DATA field, NDATA; and the number of pad bits, NPAD, are computed from the length of the PSDU (LENGTH) as follows: The function ceiling (.) is a function that returns the smallest integer value greater than or equal to its argument value. The appended bits (“pad bits”) are set to “zeros” and are subsequently scrambled with the rest of the bits in the DATA field. CCEE Wireless LAN OFDM TXTIME calculation The value of the TXTIME parameter returned by the PLME-TXTIME.confirm primitive shall be calculated according to the following equation: LLC；MPDU；MAC；PLCP；CCA；PPDU；OFDM；DS；EIFS；ISM CCEE Wireless LAN * 1. 8 chip complex code - 16 x 1 vector - 4096 complex 8 bit sequences out of which only 64 of them have good orthogonality property. CCEE Wireless LAN Request to Send (RTS) A station sends an RTS frame to a particular receiving station to negotiate the sending of a data frame. The value of the Duration field, in microseconds, is the amount of time the sending station needs to transmit the frame, plus one CTS frame, plus one ACK frame, plus three short inter-frame space (SIFS) intervals. If the calculated duration includes a fractional microsecond, that value is rounded up to the next higher integer. RA 6 Octets Duration 2 Octets Frame control 2 Octets MAC Header FCS 4 Octets TA 6 Octets CCEE Wireless LAN Clear to Send (CTS) After receiving an RTS, the station sends a CTS frame to acknowledge the right for the sending station to send data frames. Stations will always pay attention to the duration information and respond to an RTS frame, even if the station was not set up to initiate RTS frame sequences. The value of the Duration field, in microseconds, is the amount of time from the Duration field of the previous RTS frame