模组式PCBA水清洗机讲解课件.pptVIP

The whole AST MC-1700 Series is formed by basic three modules, MC-1700CC is for modular 1700mm chemical cleaner, MC-1700DC is for modular 1700mm DI water cleaner, MC-1700DS is for modular drying system. Each system is with individual controlling, customer can add the modular as their cleaning requirement.整套MC-1700系统由三个独立的部份构成，MC-1700CC 为化学段清洗机，MC-1700DC为DI水段清洗机，MC-1700DS为快速烘干段。每段分别独立控制，客户可以根据实际清洗的要求及产量选择更多的化学段或是DI水洗段.; Toucscreen and PLC for controlling. 全触摸屏与PLC控制系统Can set more than 50 groups parameter可设定50组以上清洗参数Sound and lighting alarm 声光报警; All the white PP material is imported from TaiWan, best material to handle both acid and alkane. 整机制作材料为台湾产PP一级料，耐酸碱性好，长期使用机器表面颜色无变化。;Optional with dual SUS mesh belt for conveyor, upper/bottom belt move simutaliously, so to avoid PCBs movement under the waters flow. 可选配有双不锈钢网带输送，上下网带同步运行，保证PCB板在水流的作用下位移小。;关键部件如泵浦，发热体均为台湾品牌。Key parts like pump and heater are from quality Taiwan manufactures。;出水管路均采用不锈钢制，耐压高，无泄漏。Output plumping are used with SUS which can stand high pressure and without any leakage.;正面采用玻璃视窗，配合内部防水LED灯管，可以观察机器的内部情况。Use glass window at front side, with the help of water-proof LED light inside machine, can easy monitor machines inside situation.;不锈钢制喷管，在压力与水温的作用下无任何变形。喷管采用卡口式快速度安装设计，可以方便的进行装拆. Qucik connection design for SUS spray tube, easy for maintenance.;Module Aqueous Cleaner: MC-1700 Series模组式水清洗机 : MC-1700 Series----清洗段/CCDC; 全不锈钢制内胆，热风与红外混合式烘干方式，可快速对产品进行烘干。Fully SUS made inner tunnel, hot air knife mixed with IR heater, dry the products quickly.;Module Aqueous Cleaner: MC-1700 Series模组式水清洗机 : MC-1700 Series----烘干段/DS