75T锅调试方案.docVIP

YG－75/5.29－M型循环流化床 锅炉整套启动调试方案及措施 Integrated Starting and Commissioning Test Schemes and Measures of YG－75/5.29－M CFB Boiler 编制： Compiled by: 审核： Reviewed by: 批准： Approved by:  目 录 Contents 1 编制目的 Purpose of compilation 2 编制依据 Basis of compilation 3设备概述 Equipment overview 4 锅炉整套启动调试范围 Integrated starting and commissioning test scope of boiler 5 组织分工 Division of organization 6锅炉整套启动前应具备的条件 Conditions to be ready before the boiler integrating 7整套启动试运步骤 Process for integrated starting and commissioning test 8整套启动阶段调试进度计划 Debugging schedule for integrated starting and commissioning 9 反事故措施 Anti-accident measures 10安全注意事项 Safety considerations 1. 编制目的 Purpose of compilation 为了顺利完成电厂YG－75/5.29－M循环流化床锅炉启动调试工作，明确调试工作任务和职责分工，规范调试项目和调试程序，使调试工作有组织、有计划的进行。结合本机组特点及同类型机组调试、运行经验情况，特制定本调试方案。 Combining with the characteristics of machine set and the experience from the same type of machine operating and commissioning, this commissioning scheme is specially formulated for the purpose to successfully complete the startup commissioning of YG－75/5.29－M circulating fluidized bed boiler for power plant, clarify commissioning tasks and division of responsibility, standardize commissioning projects and procedures and to carry on the organic and designed commissioning. 2.编制依据 Basis of compilation 2.1 设备生产厂家技术资料和实验要求。 Requirements for technical data and experiment by equipment manufacturer 2.2本锅炉机组技术规范，调试要求 和安装使用说明书。 Technical specification, commissioning requirements and operation manual for this boiler unit 3.设备概述 Equipment overview 3.1锅炉本体 Boiler body 电站工程1×75t/h CFB由济南锅炉集团有限公司生产，其型号为YG-75/5.29-M型循环流化床锅炉，该锅炉为75t/h次高压、次高温循环流化床锅炉，具有燃烧效率高、低污染和节约燃料、便于调节等特点。该锅炉结构简单、紧凑，炉型与传统的煤粉锅炉类似。锅炉本体由燃烧设备、给煤装置、床下点火装置、分离和返料装置、水冷系统、过热器、省煤器、空气预热器、钢架、平台扶梯、炉墙等组成。锅炉采用床下油点火方式；流化床布风板采用水冷布风板结构，布置钟罩式风帽，锅炉采用3台给煤机由炉前给煤；分离装置采用高温汽冷旋风分离器。 1×75t/h CFB for power plant, whose type is YG-75/5.29-M circulating f