高性能三偏心气动调节蝶阀-上海高特.DOCVIP

ZSSWm气动高性能密封切断调节蝶阀 ZSSWm pneumatic high-performance seal shutoff and regulation butterfly valves 概述 Ⅰ General ZSSWm型气动高性能密封调节蝶阀由ZSH系列气动活塞式执行机构和高性能密封蝶阀组成。它接受调节仪表发出的模拟量控制信号，进行自动调节。可与气动单元组合仪表配套使用，实现工艺管道中气体、液体的流动状态调节控制。它可根据工艺要求在智能定位器内安装限位开关和阀位传感器，实现小流量监控或动作保护，可根据客户的不同要求设置在断电，断气，断信号的情况下自动快开或快关。 ZSSWm pneumatic high performance seal regulating butterfly valves, consisting of ZSH serials pneumatic piston type actuators and high performance butterfly valves, have been designed for automatic control over the flow of the gases and liquid in the process pipelines, by receiving the analog quantity control signal from the regulating instrument and combing the pneumatic unit combined instrument. According to the process requirements, it can be provided with the limit switch and position sensor in the intellectual positioner to achieve a low-flow monitor or action protection, and automatic rapid opening and closing in case of failure of power, air and signals, according to different demands of the users,. 本系列调节蝶阀带有手动操作机构，在断气源情况下，根据需要可由手动操作来完成阀门的开、关调节。该产品具有流通能力大、阻力小、密封压差大，密封性能好的优点，可广泛应用于冶金、石油、电力、轻工、医药、船舶及排水工程等工业部门，特别适用于需要比例调节切断和要求快速自保的工作场合，具有一阀多用功能。 This series regulating butterfly valves are provided with a manual operation device and, in case of the failure of the air supply, can be operated in a manual way as needed. The product features large flow capacity, low resistance, seal differential pressure and excellent seal property. It’s widely used in the industries including metallurgy, petroleum, power, chemistry, medicines, watercrafts and drainage works, especially, suitable to applications where the proportional regulation and shutoff and rapid self-holding are required, presenting a multifunction. 主要性能规范和零部件材料 Ⅱ Principal performance specifications and materials of component parts 公称通径 50～1400mm 公称压力 0.6、1.0、1.6、2.5、4.0Mpa 150Lb 300Lb 600Lb 适用介质 蒸汽、空气、煤气、水、污水、油品、硝酸类等 阀 体 WCB、CF8、CF8M、CF3、CF3M 阀 板 WCB+硬铬、 CF8、CF8M、CF3、CF3M+堆焊司太立合金 阀 座 CF8、CF8M、CF3、CF3M+堆焊司太立