厂用电继电保护整定计算的微机实现 毕业设计.docVIP

毕业设计说明书(论文) 学生姓名： 班级学号： 院、系、部： 专 业： 指导教师： 合作指导教师： Undergraduate Design (Thesis) POWER PLANT SYSTEM’S RELAY SETTING CALCULATION OF MICROCOMPUTER BY Supervised by Professor 摘 要 随着大容量机组和大型发电厂的出现，同时由于电力系统规模的日益扩大和继电保护技术的迅速发展，继电保护工作越来越复杂本毕业厂用电系统继电保护整定计算，其通过分析各种短路类型，进行短路电流计算，配合保护整定原则进行整定。同时通过研究短路电流和继电保护整定计算的计算方法，得出相应的规律并且配合Visual Basic 语言程序设计，利用面向对象的Visual Basic语言进行编程，从而简化发电厂厂用电系统短路和继电保护计算整定。编写的程序，可以使得类似的厂用电系统能够利用该程序简便的完成各种类型的短路计算和继电保护计算整定，工作人员能够用更加简洁和直接的方式快速的完成计算整定在介绍了程序设计以及功能实现后，又以具体算例对程序进行了简单测试。对于提高整定计算效率，保证计算结果的准确性和简化计算有较强的适用性。 关键词：厂用系统,继电保护,短路计算 Abstract With the large capacity unit and the emergence of large power plants, and because of the increasing size of power system protection technology and the rapid development of increasingly complex protection work, researching new and more flexible and practical calculation of relay setting Method has great economic value and social benefits. The auxiliary power system protection graduation setting calculation, the short circuit through the analysis of various types, short-circuit current calculation, with the protection setting calculation principles. At the same time by studying the short circuit current and relay setting calculation method, obtained with the corresponding laws and Visual Basic programming language, Visual Basic using object-oriented programming language, which simplifies the power plant auxiliary power system short-circuit and following the Protection of computing power setting. Written program that can make similar use of the auxiliary power system can process various types of short-circuit the completion of simple calculation and protection setting calculations, the staff can use a more concise and direct way to complete calculations rapidly tuning to play Effectiveness of protective devices to prevent errors ca