基于ANSYS叶片泵轴建模与模态分析.docVIP

基于ANSYS叶片泵轴建模与模态分析 　　【摘 要】采用ANSYS有限元软件建立了叶片泵轴的实体模型，并进行了模态分析，得到叶片泵轴的固有频率和振型特征。通过对叶片泵轴结构参数进行修改，使其固有频率远离叶片泵噪音频率范围，避免噪声的产生，为叶片泵的进一步研究提供了参考依据。 　　【关键词】叶片泵；模态分析；噪音 　　Modeling and modal analysis of vane pump shaft based on FEM 　　WU Wei 　　（LiaoningTiger Leap fast Yatung Bus Inc Fuxin Management Office Liaoning Fuxin 123000 China） 　　【Abstract】Entity model of vane pump shaft and modal analysis were done by using ANSYS finite element software. Then the natural frequency and characteristics of mode types were gained.The natural frequency of vane pump shaft were out of the frequency range of noise by modi