基于单片机的火报系统设计.docVIP

毕业设计（论文） 题 目：基于单片机XXX 职称： 助理工程师 学生姓名： XXXXXX 学 号： XX 摘 要 随着经济与技术的迅速发展，为了避免火灾和减少火灾所造成的损失，预防和监测成为重中之重。因此，了解并掌握各类传感器的基本结构、工作原理及特性是非常重要的。本文利用单片机结合技术以及无线传输技术而开发设计了这一NRF24L01无线传输模块 关键词：火灾报警器，火焰传感器，烟雾传感器，NRF24L01，DS18B20Abstract With the rapid?development of?economy and?technology,?the fire?is?facing today people all over the world?a?common disaster problem. It caused?serious life, property loss?to human society,?in order to?avoid the fire?and?reduce fire?losses caused,?the prevention and?monitoring?become the?priority among priorities. Monitoring?system and?alarm mechanism?timely?can greatly reduce?the casualties,?reduce unnecessary loss?to the society.?To use more and more various sensors?in the monitoring system.?Therefore,?understanding and?it is very important to master?all kinds of?sensors structure,?working principle and characteristics. In order to improve the?awareness and understanding of the sensor,?especially the thorough research to the?fire monitoring?sensor?and an understanding of its usage and the use,?utility,?extensive and?typical?principles on the?design of the system.?This combination of?sensor?technology and wireless transmission technology development and design of the?fire control?system with single chip microcomputer. This paper is based on SCM technology and wireless transmission technology as the core and with other electronic technologies, fire a technology level of design and a good alarm system. The flame sensor, smoke sensor, temperature sensor to monitor the state of the environment, will be sent to the single chip microcomputer monitoring information, the data processing after 1602 on the LCD display, and through the wireless transmission module transmits the monitoring data, in accepting the test data and the preset value contrast, beyond the scope of the sound and light alarm. Based on STC89C52 microcontroller and?NRF24L01 wireless transmission module as the?