董传勇薛克敏：接套体多向模锻工艺分析及模具设计.docVIP

接套体多向模锻工艺及模具设计 合肥工业大学 材料科学与工程学院 董传勇 薛克敏 赵茂俞 袁美玲 摘要 分析了接套体多向模锻工艺及模具设计过程。提出了两种成形方案，论证了一料两件方案的优越性，设计了相应的成形模具。对类似零件的成形工艺及模具设计具有较好的指导和借鉴作用。 关键词：接套体；多向模锻；模具设计 Multi-cored forging technology and design of die for connecting sheath Abstract Multi-cored forging technology and die designing process for connecting sheath were analyzed. Two forming plans were put forward and the advantage of two parts from one billet plan was proved. Then the corresponding die was designed. The process plays a guiding and reference role for the similar part forming technology and die design. Key words: connecting s